 |
What you will need:
- 1 roll of personalized ribbon
- Sharp scissors
- Material glue or a stapler |
|
1. Cutting the personalised ribbon roll |
|
Your personalised ribbon is delivered in a roll of 15m. You need to cut the ribbon to make your bow. |
|
Unroll the roll printed ribbon and cut it every 30cm in the small gap between your name(s) and the date of your wedding or christening. |
|
2. Creating the ribbon bow |
|
Cross the right side over the left side to begin making your bow. At this point, you can fix the ribbon using a little material glue to hold the crossover point in place. |
|
Pull the top of the bow down to the point where the bow crosses and fix the ribbon with a little material glue. |
|
Your personalised ribbon bow is complete. |
|
Note: alternatively, use a good stapler, pliable wire or a strong adhesive to hold the bow in place. |
|
